HARLEY DAVIDSON TOURING FRONT LOWERING KIT REMOVAL AND INSTALLATION MANUAL
download REMOVAL 1. Place suitable blocking under frame to raise front wheel several inches off the floor. For best results, use a hydraulic center stand on a level surface. 2. Refer to the appropriate...
View ArticleHAR:EY DAVIDSON FLHR/C/S (Road King) FRONT END LOWERING KIT REMOVAL AND...
download Removal (Left and Right Forks) 1. Place suitable blocking under frame to raise front wheel several inches off the floor. For best results, use a hydraulic center stand on a level surface. 2....
View ArticleAluminum Body One-Way Adaptive Installation Instructions
download Place the motorcycle on the centerstandor block the motorcycle securely so the rear wheel is slightly off the ground. 2. Remove the old shocks and note location of mount- inghardware. If...
View ArticleHarley Davidson 39 mm Front Spring Lowering Kit INSTALLATION PROCEDURE
download 1. Support the motorcycle so the front wheel is off the ground. Next remove the front wheel and fender. Remove the fork cap nuts and loosen the lower triple clamp pinch bolts. Remove the front...
View ArticleFC Shock Spring Installation Guide
download Installation: 1. Remove the fork springs according to the OEM Owner’s Manual. 2. Check/adjust fork oil level and weight according to OEM Specifications. Caution: Most inverted forks will not...
View ArticleStreet Fork Spring Installation Instructions
download 1. Remove fork springs according to instructions contained in your shop manual. For maximum performance we highly recommend that the forks be thoroughly cleaned, inspected and new fork oil...
View ArticleHARLEY DAVIDSON FL SOFTAIL PROFILE LOW FRONT SUSPENSION KIT INSTALLATION
download Fork Spring Removal 1. Elevate and support the vehicle so the front tire is off the floor and the forks are fully extended. 4 9 3 1 10 11 2 5 6 7 8 is04004 1. Slider tube cap 2. Spacer washer...
View ArticleHONDA 450E/ S MOUNTING AND ARS ADJUSTMENT INSTALLATION
download MULTI-RATE SPRINGS AND THE ARS SYSTEM Depending on the application dual–rate springs are fitted on the shocks. Dual-rate springs are just that– a spring set with two separate rates. This is...
View ArticleHonda ATV 650 Lift Kit REMOVAL AND Installation
download Place jack under center on the ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it is secure, but so that the A-arms and shocks can droop...
View ArticleKTM Enduro Engineering Shock Spring Removal And Installation Instructions
download 1 Place motorcycle on a stand so that the rear wheel is off the ground. 2 Remove the upper shock bolt. (Figure 1) 3 Remove the lower shock bolt. (Figure 2) 4 Remove the shock from the...
View Article
More Pages to Explore .....